How to Apply Filters within Autodesk Revit

Filters are a view specific element that allow you to control how certain objects will display according to set conditions or criteria.

For example you may need to show each door type as a different colour based on its type, size or function. You can create filters to control how different objects will display. See How to Create Revit Filters.

I will show how we can control the appearance of the double doors by adding a filter and some graphic overrides.

Revit Plan Section with Doors

To Apply a filter to a view

Go to the View tab, Graphics Panel and hit the Visibility Graphics button. This will take you to your visibility graphic overrides dialogue box. Click on filters tab on the right hand side.

Revit Filters Tab

If there are no filters available, then you can Add one to the list by clicking on the Add Button button.

Add Filters Dialogue Box

Select the relevant filter from the list of existing filters available. If the filter list does not contain the filter you need, you can create a new filter using the Edit or New Button button, where you can go to create a new one.

Once you have selected your filter, you can then add it to the Filters list in the Visibility graphic display area by hitting Ok Button.

Filters List

The new filter is added to the filters list. It is important to name your filter in a way that allows you to clearly identify it and understand its purpose. In this particular example I would like to filter all double doors that match the description of this family type.

I can set visual overrides for the following things:

Visibility – used to determine whether the object will be seen in the view or not.

Projection/Surface – the appearnace of the objects outer surface when it has not been cut. For example in a 3D view when you see the surface of most objects.

  • Lines: the lines that outline or show around the perimeter of the object.
Revit Line Graphics
Revit Line Colours

I have changed the line surface colour to orange for a noticeable difference.

Line Graphics Weight

Change the Line thickness on screen between 1mm and 16mm.

Line Graphics Summary Dialogue

Clear Overrides Button will clear any of the settings you have applied to the Line overrides.

To confirm your settings hit Ok Button.

Patterns: the pattern that will represent a surface texture or fill pattern used on the surface.

Fill Pattern Graphics Dialogue

Choose from the list of pre-set patterns in the list or use the Dots Button button. This will give access to additional options as well as the ability to create or modify an existing pattern in the list.

Fill Patterns Additional Options

Set the colour for the line pattern.

Fill Pattern Line Colour
Fill Pattern Summary

You can see a preview of the line colour and pattern appearance before you confirm the settings.

Hit Ok Button to confirm the settings.

Transparency: set the transparency or opacity of the object between 0-100.

Fill Pattern Transparency

Cut – how the object will look when it is dissected. For example a wall in a plan view when the cut plane dissects the wall at a certain height or level.

  • Lines: the linework used to define the outer edge of the object when it has been dissected.
  • Patterns: the pattern that is used to represent the inside of the object if it was cut open at a certain height.

The dialogue box for both projection and cut are the same with the same settings for both.

You will see previews of all the overrides set in the filter.

The pattern preview is only half of the box as there were both foreground and background areas that could have been adjusted with different settings.

Once you have finished adjusting the settings and applied the filter to a view, you will notice that any objects that meet the criteria will take on the appearance settings applied in the filter.

Revit Plan with Doors Filter Applied

Settings such as Halftone are easier to see once the changes have been applied.

Revit Plan with Doors Filter and Halftone

You can control the visibility of the object using the Visibility toggle.

Revit Plan with Doors Filter and Visibility Toggle

If an object matches the criteria of 2 or more filters, the list order of the filters will determine how the object will appear. The top filter takes priority so the object will take on the properties of the highest applicable filter. This can be rearranged using the Up and Down buttons in the Visibility Graphics dialogue box, filters tab.

Revit Applied Filter Ordering

You can add as many filters as you need to control the visibility or appearance of multiple objects in a view or views. Filters can be applied to any view, but remember that they are view specific elements.

For more information on this blog post or if you have any other questions/requirements, please complete the below form:

Related Links

Autodesk Revit – Autodesk Platinum Partner | Man and Machine

Revit Training Courses – BIM Modelling Skills | Man and Machine

Autodesk AEC Collection – Platinum Partners | Man and Machine

Revit Architecture Training – Platinum Partner | Man and Machine

Previous

Autodesk Revit Crashes When Closing a Window

External Thread and Circular Toolpath Error

Next

Click here to view all of our blog posts